產品
1保修 - $770.00
The TMT-2200S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
Dual ports with simultaneous heat up.
High thermal recovery & performance.
470KHz power supply with built-in LCD display.
No calibration or operator training required.
No additional coil assembly costs.
系統配置
TMT-2200S 參數表
| 輸入電壓: | 100-240 VAC |
| 焊嘴對地電位: | 2mV, true RMS 50-500Hz |
| 焊嘴對地電阻: | <2 Ohms DC |
| 閑置溫度穩定性: | +/- 1.1°C (2°F) |
| 最高內部溫度: | 50°C (122°F) |
| 保險絲: | 250V 2A |
| 輸出功率(最大): | 50 Watts RF |
| 輸出頻率: | 470 Khz |
| 尺寸 (W x H x D): | 126mm x 230mm x 148mm (5" x 9" x 5.8") |
| 重量: | 2.6 KG (5.7 LBS) |
| 輸入頻率: | 50-60 Hz |
産品安全認證標識:
|
裝箱單1
| TMT-2200PS | 主機電源系統 |
| 2X SHH-5 | 烙鐵手柄支架 |
| 2X SHP-KM | K系列烙鐵手柄 |
| 2X RMP-1 | 烙鐵頭拆卸墊 |
| 2X BC-1 | 銅絲球 |
| 2X SPG-1 | 不含硫化物海綿 |
| 1The packing list will vary based on system configuration. | |
K 系列 一體化烙鐵頭 (For use with TMT-2200S-2KM)
