产品
1保修 - $770.00
The TMT-2200S is based on Curie Heat Technology which responds to the thermal demands of each solder joint by adjusting the power instantaneously, thereby meeting the exact requirements of the substrate component and solder material.
Dual ports with simultaneous heat up.
High thermal recovery & performance.
470KHz power supply with built-in LCD display.
No calibration or operator training required.
No additional coil assembly costs.
系统配置
TMT-2200S 参数表
| 输入电压: | 100-240 VAC |
| 焊嘴对地电位: | 2mV, true RMS 50-500Hz |
| 焊嘴对地电阻: | <2 Ohms DC |
| 闲置温度稳定性: | +/- 1.1°C (2°F) |
| 最高内部温度: | 50°C (122°F) |
| 保险丝: | 250V 2A |
| 输出功率(最大): | 50 Watts RF |
| 输出频率: | 470 Khz |
| 尺寸 (W x H x D): | 126mm x 230mm x 148mm (5" x 9" x 5.8") |
| 重量: | 2.6 KG (5.7 LBS) |
| 输入频率: | 50-60 Hz |
产品安全认证标识:
|
装箱单1
| TMT-2200PS | 主机电源系统 |
| 2X SHH-5 | 烙铁手柄支架 |
| 2X SHP-PM | P系列烙铁手柄 |
| 2X RMP-1 | 烙铁头拆卸垫 |
| 2X BC-1 | 铜丝球 |
| 2X SPG-1 | 不含硫化物海绵 |
| 1The packing list will vary based on system configuration. | |
P 系列 一体化烙铁头 (For use with TMT-2200S-2PM)
